---
title: "Sapphire substrate dimensions: connect the drawing to the receiving fixture"
url: https://memory.wiki/crTcLKzi
updated: 2026-11-20T01:13:17.420Z
source: "api"
---
# Sapphire substrate dimensions: connect the drawing to the receiving fixture

## Define the interface that matters

A sapphire substrate drawing should identify the dimensions needed by the next operation. Outside dimensions and nominal thickness are a starting point, but a carrier, mount or inspection fixture may also depend on edge treatment, usable surface area and the identification of a particular face. Give those requirements a controlled place in the drawing package.

## Separate three descriptions

Describe the material being ordered, the finished geometry, and the way the part is located in the customer fixture. For each functional dimension, include its tolerance and the drawing reference used during inspection. Mark any nonfunctional border or edge exclusion. If crystallographic orientation matters, state the agreed orientation convention explicitly; a face label such as A or B is not itself an orientation specification.

## Review before the trial order

Send the drawing revision and the relevant fixture-interface information together. Ask which dimensions will be inspected, at what sampling scope, and whether actual measurements can be supplied. If a drawing includes a requirement that has not yet been qualified, identify it as an open technical question. Do not let a quotation silently turn an unresolved design assumption into an acceptance condition.

## Retain the trial relationship

Record which substrate identifier was tested in which fixture, together with the fixture revision and receiving observations. When the mount or substrate drawing changes, review the interface again. A successful trial with one revision does not establish that a different edge profile, thickness tolerance or locating reference is interchangeable.

For project-specific material and processing enquiries, see [JXTSEMI wafer and substrate information](https://www.jxt-wafer.com/). Confirm availability, achievable requirements and reporting scope with the supplier.


---

## Summary
A sapphire substrate drawing must clearly define material specifications, finished geometry, and the specific interface requirements of the receiving fixture. Suppliers and customers should verify these dimensions and inspection protocols before production to ensure that design assumptions do not become unintended acceptance conditions.

## Themes
- Sapphire substrate engineering
- Fixture interface design
- Drawing specification standards
- Trial order management

## Key takeaways
- Sapphire substrate drawings should explicitly define dimensions required by the next operation, such as edge treatment and usable surface area.
- Drawings must separate descriptions for the material, finished geometry, and fixture location methods.
- Each functional dimension must include its tolerance and the specific reference used for inspection.
- Unqualified requirements in a drawing should be identified as open technical questions before a trial order.
- Trial records must link specific substrate identifiers to fixture revisions and receiving observations.

## Insights
- Technical drawings must distinguish between the physical material ordered and the functional requirements of the receiving fixture.
- A successful trial result is specific to a single revision and does not guarantee interchangeability if dimensions or fixture profiles change.
- Labeling a face as A or B is insufficient for crystallographic orientation and requires an explicit, agreed upon convention.

## Open questions / gaps
- What are the specific industry standard conventions for defining crystallographic orientation beyond simple face labels?

